Medical Device Design & Development
The Medical Murray Benchtop Tube-Flaring System allows you to quickly and safely flare the ends of a variety of difficult to expand plastic tube diameters and materials (including TeflonTM). Our use of a heated mandrel and foot operated air cooling quickly and safely completes your task in seconds.
- No Moving Parts
- Alternate Mandrel Sizes
- Task Completed in Seconds
- Handles A Variety of Tube Materials and Diameters
- Uniform Flaring Process Without Split Ends
- Perfect for Miniature Tube Flaring Applications
General Specifications
- Nominal Tube ID 0.062" to 0.250"
- Heated Mandrel
With tube guide; available in a variety of geometries for different tubing diameters and flaring results.
- Tube Cooling
Using compressed air, controlled by an included foot switch.
- Heated Controller
With PID or ON / OFF control; self tuning; site configurable. Factory preset to a maximum of 600F.
- Thermocouple Custom LED; standard type J.
- Enclosure
Rugged aluminum; Nema 1; with fused ON / OFF switch; six feet or three wire cord and plug; four rubber feet.
- Utilities
Electricity, 110 vac; compressed air, minimum 20 psi.
- Dimensions 10-1/4" W 6-1/2" D 6-1/2"H
